5KN金屬材料高溫拉力試驗機

型號：BWN

5KN金屬材料高溫拉力試驗機 符合標準：

GB/T4338-1995 High temperature tensile testing machine for metal materials

model: BWN

GB/T4338-1995 High temperature tensile testing machine for metal materials meets the standard:

GB/T4338-1995 High temperature tensile test for metallic materials

GB/T4338-1995 High temperature tensile testing machine for metal materials Application scope:

It can conduct mechanical property testing and analysis research on metals and non metals, including tensile, peeling, compression, bending, etc. According to standards such as GB, JIS, ASTM, DIN, ISO, etc., the maximum test force value, fracture force value, yield strength, upper and lower yield strengths, tensile strength, various elongation stresses, various elongation rates, compressive strength, bending deflection, elastic modulus, constant elongation stress, constant stress elongation and other parameters can be automatically calculated.

Tensile testing machines are widely used in industries such as aerospace, petrochemicals, machinery manufacturing, vehicle manufacturing, wires and cables, textile fibers, plastic rubber, ceramics, food, pharmaceutical packaging, aluminum-plastic pipes, plastic doors and windows, geotextiles, films, wood, paper, metal materials and products.

GB/T4338-1995 Composition of High Temperature Tensile Testing Machine for Metal Materials:

The universal material testing machine is composed of a measurement system, a drive system, a control system, and a computer (computer system type tensile testing machine).

GB/T4338-1995 Technical specifications for high temperature tensile testing machine for metal materials:

Maximum test force (kN) 5kN

Testing machine measurement accuracy level 1 (standard version)

Effective force range 2% -100% FS/

Resolution of 1/300000

Relative error of indication ? 1%

Speed adjustment range 0.05~500mm/min (stepless speed regulation)

Accuracy better than ? 1% of the indicated value

Force control rate control range 0.05-5% FN

Measurement range: 0-999mm

Resolution 0.001mm

Measurement accuracy better than ? 1% of the indicated value

Weight approximately 120KG

Temperature range for use: 10 ? C to 35 ? C; Humidity: 30% -85%;

主機配置

1)  高強度主機一臺（單臂式結構 雙柱式結構）可選

2)  高精度光電編碼器一只

3)  全數字調速系統和全數字調速電機各一套

4)  高精密滾珠絲杠副一套

5)  精密圓弧同步減速系統一套

6)  高精度負荷傳感器一支

7)  專用拉伸輔具一套

8)  聯想計算機一臺

9)  噴墨打印機一臺

10)  AD800萬能試驗卡一套

11)  WINDOWS98/2000/XP操作環境下的試驗機專用軟件一套

軟件說明

軟件系統：中英文Windows2000/XP/Win7平臺下軟件包

自動儲存：試驗條件、試驗結果、計算參數、標距位置自動儲存。

自動返回：試驗結束后，試驗機橫梁會自動返回到試驗初始位置。

連續試驗：一批試驗參數設定完成后，可連續進行測試。

多種曲線：同一圖形上可顯示多種不同的曲線：荷重--位移、荷重-時間、位移--時間、應力—應變、荷重—兩點延伸等到多種曲線。

曲線對比：同組試樣的曲線可在同一張圖上疊加對比。

報告編輯：可按用戶要求輸出不同的報告形式。

動態顯示：測試過程中，負荷、伸長、位移及選中的試驗曲線隨著測試的進行，實時動態顯示在主控屏幕上。

自動變標：試驗中負荷、伸長等曲線坐標，如果選擇不當，可根據實測值的大小，自動變換座標。保證在任何情況下曲線以最大的形式顯示在屏幕上。

峰值保持：在測試的整個過程中，測試項目的最大值始終隨著試驗的進行，在屏幕窗口上顯示。

執行標準：滿足GB、ISO、JIS、ASTM、DIN等多種試驗方法和標準。

維護與保養

1軸承內的潤滑脂一般3—5年更換一次。

2 試驗機應每年請當地計量部門檢定一次。

常見故障及排除

     經過以上排查，還不能排除設備故障，請及時撥打我公司售后服務熱線電話，由我公司專業技術人員協助解決，嚴禁用戶私自打開設備進行維修，若私自打開設備進行維護，一切后果我公司不承擔任何責任。

Host configuration

1) One high-strength host (single arm structure double column structure) is optional

2) One high-precision photoelectric encoder

3) One set of fully digital speed control system and one set of fully digital speed control motor

4) A set of high-precision ball screw pairs

5) A set of precision arc synchronous deceleration system

6) One high-precision load sensor

7) A set of specialized stretching aids

8) One Lenovo computer

9) One inkjet printer

10) One set of AD800 universal test card

11) A set of specialized software for testing machines under WINDOWS98/2000/XP operating environment

software documentation

Software system: software packages in both Chinese and English for Windows 2000/XP/Win7 platforms

Automatic storage: Test conditions, test results, calculation parameters, and gauge position are automatically stored.

Automatic return: After the experiment is completed, the crossbeam of the testing machine will automatically return to the initial position of the experiment.

Continuous test: After setting a batch of test parameters, continuous testing can be conducted.

Multiple curves: Multiple different curves can be displayed on the same graph, including load displacement, load time, displacement time, stress-strain, load two-point extension, and more.

Curve comparison: The curves of the same group of samples can be overlaid and compared on the same graph.

Report editing: Different report formats can be output according to user requirements.

Dynamic display: During the testing process, the load, elongation, displacement, and selected test curves are dynamically displayed in real-time on the main control screen as the test progresses.

Automatic scaling: In the experiment, if the coordinates of the load, elongation, and other curves are not selected properly, the coordinates can be automatically changed according to the size of the measured values. Ensure that the curve is displayed on the screen in its maximum form under any circumstances.

Peak holding: Throughout the entire testing process, the maximum value of the test item is displayed on the screen window as the experiment progresses.

Execution standards: Meet various testing methods and standards such as GB, ISO, JIS, ASTM, DIN, etc.

Maintenance and upkeep

The lubricating grease inside the bearing is usually replaced every 3-5 years.

The testing machine should be inspected by the local metrology department once a year.

Common faults and troubleshooting

Reasons and solutions for fault phenomena

After startup, there is no display controller power cord, fuse, switch, etc

Activate the power supply, fuse, switch, and control cables of the inactive host

After loading, the test force did not show whether the sensor was connected properly

Stability check of force value system grounding wire

Is the deformation sensor connected if there is no deformation after the crossbeam moves

Test force display maximizes sensor over range loading or sensor wire breakage

Check if the printer is equipped with a printer and if it is connected to the printer

After the above investigation, the equipment malfunction cannot be ruled out. Please call our company's after-sales service hotline in a timely manner and have our professional technical personnel assist in solving the problem. It is strictly prohibited for users to open the equipment for maintenance without authorization. If the equipment is opened for maintenance without authorization, our company will not bear any responsibility for any consequences.

售后服務。

1、保修期內非人為損壞的零部件免費更換，保修期內接到用戶邀請后，最遲響應時間為4小時內，在與用戶確認故障后，我公司會在48小時內派工程師到達現場進行免費服務，盡快查清故障所在位置和故障原因，并向用戶及時報告故障的原因和排除辦法。

2、提供實時的遠程診斷和維護服務。

3、每年進行客戶回訪。

4、保修期外繼續為用戶提供優質技術服務，在接到用戶維修邀請后2天內派工程師到達用戶現場進行維修。并享有優惠購買零配件的待遇。

5、保修期內人為損壞的零部件按采購（加工）價格收費更換。

6、軟件升級：終生免費提供新版本控制軟件。

7、安裝及調試合格后，自客戶簽字認可之日起，我方對于提供的產品免費保修三年。保修期滿后，我方將繼續跟蹤服務，客戶享受終生維修，負責及時提供必要的售后服務、技術咨詢。

8、產品交貨期：盡量按用戶要求，若有特殊要求，需提前完工的，我公司可特別組織生產、安裝，力爭滿足用戶需求。

9、保修承諾：我司對本次協議供貨有效期內所提供的所有產品保質期 ，有效期內所提供的產品，提供正常工作日全天侯服務，終身技術服務支持。

10、響應時間：保修期內，產品若發生故障，在接到貴公司報修后，24小時內幫客戶解決問題。

11、服務體系：作為設備供應商本公司對本次招標所提供的產品提供保障體系： 當設備出現故障，必要時將派指定的專業技術員在規定時間內上門維修或寄修，產生的運費由本公司承擔。

12、產品價格承諾1、在同等競爭條件下，我公司在不以降低產品技術性能、更改產品部件為代價的基礎上，真誠以最優惠的價格提供給貴方。2、在保修期內供方將免費維修和更換屬質量原因造成的零部件損壞，保修期外零部件的損壞，提供的配件只收成本費，由需方人為因素造成的設備損壞，供方維修或提供的配件均按成本價計。

13、售后服務保證

公司實力保障：本公司有完善的售后服務體系;