彎曲、撕裂、剪切試驗機【依據標準】

GB/T 16491、GB/T 1040、GB/T 8808、GB/T 13022、GB/T 2790、GB/T 2791、GB/T 2792、GB/T 16825、GB/T 17200、GB/T 3923.1、GB/T 528、GB/T 2611、GB/T 6344、GB/T 20310、GB/T 3690、GB/T 4944、GB/T 3686、GB/T 529、GB/T 6344、GB/T 10654、HG/T 2580、JC/T 777、QB/T 2171、HG/T 2538、CNS 11888、JIS K6854、PSTC-7、ISO 37、AS 1180.2、BS EN 1979、BSEN ISO 1421、BS EN ISO 1798、BS EN ISO 9163、DIN EN ISO 1798、GOST 18299、DIN 53357、ISO 2285、ISO 34-1、ISO 34-2、BS 903、BS 5131、DIN EN 12803、DIN EN 12995、DIN53507-A、DIN53339、ASTM D3574、ASTM D6644、ASTM D5035、ASTM D2061、ASTM D1445、ASTM D2290、ASTM D412、ASTM D3759/D3759M

結構特征及工作原理

本機由機械、電氣二大部分組成(見附圖)。

1機械部分結構及工作原理：

本機采用電動加載方式，底部是整機結構承載支架，內部包含有電機驅動器、加載電機、減速機構、動力傳動機構等部件；上部是試樣夾持及力值、位移測量機構，包含有試樣拉伸夾具、測力傳感器、位移傳感器等主要部件。

2 電氣部分：

    電氣部分由顯示測量控制部分組成。顯示測量控制部分實現各種控制、顯示、數據采集、處理等功能。軟件部分的操作請仔細閱讀《軟件說明書》。

3 本機的幾項主要功能：

3.1 全開放性參數設置

3.2 設置參數保存

3.3 浮動零點設置，可隨時調整零點

3.4 峰值保持及存儲，常值跟隨；

3.5 在有效速度范圍內，速度值任意設置；

3.6 橫梁移動過程中的速度快捷切換功能

3.7 靈活的數據查詢顯示功能；

3.8 過載停機保護功能；

3.9 試驗結束自動判斷功能；

3.10 極限位置保護等；

Structure characteristics and working principle

This machine is composed of mechanical and electrical parts (see attached drawing).

1 Mechanical part structure and working principle:

The machine adopts electric loading mode, the bottom is the whole machine structure bearing bracket, which contains motor driver, loading motor, decelerating mechanism, power transmission mechanism and other components; The upper part is the sample holding and force value, displacement measuring mechanism, including the sample tension fixture, force sensor, displacement sensor and other main components.

2 Electrical part:

The electrical part consists of a display measurement control part. Display measurement control part realizes various control, display, data acquisition, processing and other functions. Please read the Software Manual carefully for the operation of the software.

3 Several main functions of the machine:

3.1 Fully open parameter Settings

3.2 Setting Parameters to Save

3.3 Floating zero setting, the zero can be adjusted at any time

3.4 Peak retention and storage, constant value follow;

3.5 Within the effective speed range, the speed value is set arbitrarily;

3.6 Quick speed switching function during beam movement

3.7 Flexible data query display function;

3.8 Overload stop protection function;

3.9 Automatic judgment function at the end of the test;

3.10 Limit position protection, etc.;

lInstallation acceptance:

1. Within 5 working days after the contract is signed, a notice of site preparation and installation requirements will be issued to the user, and engineers will provide on-site guidance to ensure that the site meets the installation requirements.

2. Provide the user with a detailed equipment supply list before delivery, make special instructions and instructions on whether all the goods included in the contract contain dangerous goods, or need to be refrigerated and frozen, and whether dangerous goods or special vehicles such as refrigerated trucks and shock-proof vehicles are required for transportation, and provide a full set of complete technical information with the equipment. Including instrument manual, operation manual, circuit general block diagram. After the goods arrive at the installation site specified by the user, both parties unpack and accept the equipment according to the equipment supply list.

3. Respond within 3 working days after receiving the user's installation notice, and complete the installation and commissioning free of charge within 10 working days. The final acceptance technical indicators shall be subject to the contents described in the quotation and technical data.

4. After the installation, debugging and acceptance of the instrument is completed, our company is responsible for immediately sending professional and technical personnel to the user's location for centralized training, so that they can master the performance of the instrument (including hardware and software), training time and training number are determined according to needs, but the training time is not less than 1 day. Training documents include: "On-site training Reference", "Technical Service Content", "User training Plan", "System Maintenance Manual".

5. After the centralized training, our company promises to open training classes from time to time to help users improve the operation and maintenance level of the instrument.

維修保養方法及注意事項:

1、機臺部份，外表經常擦拭，保持清潔。

2、電鍍部份請以機油擦拭，以防止生銹宜保光亮。

3、動力螺桿及螺桿部份請加潤滑油，以保傳動靈敏。（潤滑油采黃油加入少許機油混合即可）。

4、面板（控制箱即顯示器）請用乾布擦拭，嚴防沾水，以免損壞IC電子零件。

5、各項治具及接頭配件請妥置，并擦拭防銹油，以防生銹。

6、上下班必需把電源關掉。

功能特點：采用國外先進技術，全數字放大、采集，顯示穩定、精度高、使用方便。采用鋁合金外罩，主機采用直流或交流伺服電機、精密減速機、高精度絲杠、具有傳動平穩、噪音低、速度精度高、調速范圍寬，使用壽命長等特點；液晶實時顯示，可顯示試驗力、峰值、位移、速度、試驗狀態等，外觀大方，使用方便，操作簡單；具有限位、過載自動保護、試樣斷裂自動停機等功能。配置標準拉伸附具一套。

本機采用機電一體化設計，主要由測力傳感器、變送器、微處理器、負荷驅動機構、計算機及彩色噴墨打印機構成。它具有寬廣準確的加載速度和測力范圍，對載荷、位移的測量和控制有較高的精度和靈敏度，還可以進行等速加載、等速位移的自動控制試驗。落地式機型，造型涂裝均充分考量了現代工業設計，人體工程學之相關原則。

Features: Using foreign advanced technology, full digital amplification, acquisition, display stability, high precision, easy to use. Adopts aluminum alloy cover, the main machine adopts DC or AC servo motor, precision reducer, high-precision lead screw, with smooth transmission, low noise, high speed accuracy, wide speed range, long service life and other characteristics; Liquid crystal real-time display, can display the test force, peak, displacement, speed, test state, etc., the appearance is generous, easy to use, simple operation; It has the functions of limit position, automatic overload protection, automatic stop of sample fracture and so on. Equipped with a set of standard stretch accessories.

The machine adopts electromechanical integration design, which is mainly composed of force sensor, transmitter, microprocessor, load driving mechanism, computer and color inkjet printer. It has a wide and accurate range of loading speed and force measurement, and has high accuracy and sensitivity to the measurement and control of load and displacement, and can also carry out automatic control tests of constant velocity loading and constant velocity displacement. Floor type models, modeling and painting are fully considered modern industrial design, ergonomics related principles.

主要功能：
主要對金屬材料和非金屬材料及零部件產品進行拉伸、壓縮、彎曲、撕裂、90?剝離、180?剝離、剪切、粘合力、拔出力、延伸伸長率等試驗，以及一些產品的特殊試驗。

Main functions:

Mainly for metal materials and non-metal materials and parts products tensile, compression, bending, tearing, 90?peel, 180?peel, shear, adhesive force, drawing force, elongation elongation and other tests, as well as some special tests of products.

Function introduction:

Automatic shutdown After the sample is damaged, the moving beam automatically stops moving (or automatically returns to the initial position)

Automatic shift automatically switches to the appropriate range according to the size of the test force to ensure the accuracy of the measurement data

Conditional module Test conditions and sample raw data can be stored in the form of their own standard modules; Convenient for users to call and view, save test time automatic speed change

The displacement speed or loading speed of the automatic variable speed test process can be automatically completed according to the pre-prepared and set program or manually changed

Automatic saving After the test, the test data and curves are automatically saved by the computer to eliminate data loss caused by forgetting to save the disk

Test process The test process, measurement, display, analysis, etc. are completed by the microcomputer

Display mode Data and curves are dynamically displayed with the test process

Test software Chinese Windows user interface, easy to operate

The test report can be edited and printed according to user requirements

Batch test for the same parameters of the sample, a batch of tests can be completed after one setting

Automatic process according to the test requirements, users can easily establish their own test template (method, easy to call twice, can realize the test loading speed, stress, strain closed-loop test control

After the curve traversal test is completed, the curve can be amplified and analyzed again, and the corresponding data of each point on the test curve can be found with the mouse

Add test methods Users can add test methods according to the test requirements

Limit protection has two levels of programmed and mechanical limit protection

Overload protection When the load exceeds the rated value by 3 ~ 5%, automatic shutdown

The report displays both automatic and manual modes to obtain various test results, and automatically forms a report, which makes the data analysis process simple and convenient for users

公司承諾：

1.購機前，我們專門派技術人員為您設計的流程和方案

2.購機后，將免費指派技術人員為您調試安裝

3.整機保修一年，產品終身維護

4.常年供應設備的易損件及耗品確保儀器能長期使用

5、售后管理：我公司實現計算機化管理，實行客戶定期電話回訪制度，定期復查設備的工作情況，定期電話指導用戶對設備進行保養和檢測，以便設備正常運轉，跟蹤客戶的設備使用情況，以便及時對設備進行維護

6、物流情況：及時提供貨源，確保全國范圍內2-10內到貨，持續穩定地為代理商做全面服務工作，提供合理的運作空間。公司有專業的技術人員為您安裝指導。

7、軟件升級：終生免費提供新版本控制軟件。

8、安裝培訓:儀器包裝內附有說明書，專業培訓人員為客戶指定操作者講解儀器正常操作流程、操作注意事項及儀器的日常維護要求；也可以根據客戶要求提供上門培訓服務。

品質保證：

一年保修，終身維護！